Capacity: | 2 TB (2000 GB) |
---|---|
Variants: | 500 GB 1 TB 2 TB |
Overprovisioning: | 185.4 GB / 10.0 % |
Production: | Active |
Released: | Aug 3rd, 2021 |
Price at Launch: | 368 USD |
Part Number: | CT2000P5PSSD8 |
Market: | Consumer |
Form Factor: | M.2 2280 (Single-Sided) |
---|---|
Interface: | PCIe 4.0 x4 |
Protocol: | NVMe 1.4 |
Power Draw: |
1.3 W (Idle) 4.4 W (Avg) 6.5 W (Max) |
Manufacturer: | Micron |
---|---|
Name: | DM02A1 |
Architecture: | ARM 32-bit Cortex-R5 + Cortex-M3 |
Foundry: | Micron |
Flash Channels: | 8 @ 1,600 MT/s |
Chip Enables: | 4 |
Controller Features: | DRAM (enabled) |
Manufacturer: | Micron |
---|---|
Name: | B47R FortisFlash |
Part Number: | NY122 |
Rebranded: | MT29F8T08ESLEEG4-QB:E |
Type: | TLC |
Technology: | 176-layer |
Speed: | 1200 MT/s .. 1600 MT/s |
Capacity: | 2 chips @ 8 Tbit |
ONFI: | 4.1 |
Topology: | Replacement Gate |
Die Size: | 50 mm² (10.2 Gbit/mm²) |
Dies per Chip: | 16 dies @ 512 Gbit |
Planes per Die: | 4 |
Decks per Die: | 2 |
Word Lines: |
195 per NAND String
90.3% Vertical Efficiency |
Read Time (tR): | 56 µs |
Program Time (tProg): | 502 µs |
Block Erase Time (tBERS): | 15 ms |
Die Read Speed: | 1143 MB/s |
Die Write Speed: | 127 MB/s |
Endurance: (up to) |
3000 P/E Cycles
(40000 in SLC Mode) |
Page Size: | 16 KB |
Block Size: | 2112 Pages |
Plane Size: | 550 Blocks |
Type: | LPDDR4-2133 |
---|---|
Name: | MT53E1G16D1FW-046 AIT:A (FBGA: D0ZRQ) |
Capacity: |
2048 MB
(1x 2048 MB) |
Organization: | 16Gx16 |
Host-Memory-Buffer (HMB): | N/A |
Sequential Read: | 6,600 MB/s |
---|---|
Sequential Write: | 5,000 MB/s |
Random Read: | 720,000 IOPS |
Random Write: | 700,000 IOPS |
Endurance: | 1200 TBW |
Warranty: | 5 Years |
MTBF: | 1.5 Million Hours |
Drive Writes Per Day (DWPD): | 0.3 |
SLC Write Cache: |
approx. 200 GB
(dynamic only) |
Speed when Cache Exhausted: | approx. 1800 MB/s |
TRIM: | Yes |
---|---|
SMART: | Yes |
Power Loss Protection: | No |
Encryption: |
|
RGB Lighting: | No |
PS5 Compatible: | Yes |
Controller:The controller is designed in-house, it looks very similar to previous version, which was a "Hexa-core" based ARM Controller, but Micron might have cut the number of cores or reduced the process node to improve efficiency and lowering heat output. NAND Die:This Flash can run safely at 1600 MT/s (800 MHz) |